"Radio Frequency Fingerprint Identification for Narrowband Systems, Modelling and Classification" presented by Dr. Junqing Zhang & Dr. Joseph R. Cavallaro. Based on the IEEE Xplore® article under the same title. Published: IEEE Transactions on Information Forensics and Security, June 2021. Visit article article here.
Device authentication is essential for securing Internet of things. Radio frequency fingerprint identification (RFFI) is an emerging technique that exploits intrinsic and unique hardware impairments as the device identifier. The existing RFFI literature focuses on experimental exploration, but comprehensive modelling is missing. This paper systematically models impairments of transmitter and receiver in narrowband systems and carries out extensive experiments and simulations to evaluate their effects on RFFI. The modelled impairments include oscillator imperfections, imbalance of inphase (I) and quadrature (Q) branches of mixers and power amplifier (PA) nonlinearity.
The presenters propose a convolutional neural network-based RFFI protocol. They will carry out experimental measurements over three months and demonstrate that oscillator imperfections are not suitable for RFFI due to their unpredictable time variation caused by temperature change. Their simulation results show that their protocol can classify 50 and 200 devices with uniformly and randomly distributed IQ imbalances and PA nonlinearities with high accuracy, namely 99% and 89%, respectively. They also show that the RFFI has some tolerance on different receiver imbalances during training and classification. Specifically, the accuracy is shown to degrade less than 20% when the residual receiver’s gain and phase imbalances are small. Based on the experimental and simulation results, they made recommendations for designing a robust RFFI protocol, namely compensate carrier frequency offset and calibrate IQ imbalances of receivers. They will also present our recent results mapping inference algorithms to architectures and FPGA implementations.
